3.5 Replacing the sill
21. Tack the sill to the sill connector cross-member
and to the fuel tank cross-member (vehicle interior/
exterior).
Caution!
This operation must only be performed with the
two cross-members mounted in the jig.
NOTE!
Check that the upper casting of the B-pillar is
fitted correctly into the fuel tank cross-member.
22. Tack the sill to the internal diagonal braces connecting
to the centre tunnel.
NOTE!
Check again that the semi-floorpan is fitted
correctly.
Copyright ©
2010
21
21
21
21
22
22
21