Table of Contents
Advertisement
Fuel tank
Undo the screws indicated.
Remove the upper heat shield (7).
Disconnect the pipe (8).
A "double-lock" safety clip is fitted on the union.
To disconnect the "double-lock" quick connector,
using due caution and by pressing on both sides,
push the safety clip out of its seat until you hear
the "unclick".
The difference between the safety clip "clicked"
and "unclicked" position is only a few
millimetres.
Then press on both sides of the quick coupling and
remove the pipe (8).
Remove the indicated clamp and disconnect the
pipe (9).
Support the weight of the right hand fuel tank (A)
adequately.
Undo the nuts indicated.
UP TO Ass.ly No. 89228, retrieve the shims (10).
Page 8 of 12
Advertisement
Table of Contents
