Table of Contents
Advertisement
2.7 Replacing the shock tower
Fitting the
37. Use the AVDEL FPM-35 gun to apply the 2 self-
underwindscreen
piercing fastener rivets (Ø 4.8) connecting the
covering
underwindscreen covering to the vehicle flank.
NOTE!
Insert the new self-piercing rivets next to the
old rivet holes.
38. Weld the underwindscreen covering to the upper
diagonal brace and to the A-pillar flange at the
original weld points.
Apply new corrosion inhibitor to the entire repair
area and then apply a primer coat.
Copyright ©
2010
38
38
37
Advertisement
Table of Contents
