Table of Contents
Advertisement
3.8 Replacing the subframe connector extruded section
Repair sequence
Removing the old part
1. Cut the lateral crash reinforcement tubular element,
the rear pillar reinforcement and the suspension
casting reinforcement in the area next to the weld
beads.
Caution!
Take the utmost care not to damage the casting
joints on the rear sill pillar.
2. Grind the joint weld beads between the lateral
crash reinforcement tubular element, the rear
pillar reinforcement and the suspension casting
reinforcement.
NOTE!
Do not remove any other material from the rear
sill pillar (D) and the upper external diagonal
brace (E).
Copyright ©
2010
1
1
E
2
D
2
1
2
Advertisement
Table of Contents
