Hub carriers
Support the weight of the suspension adequately.
Fit the brake disc shield (15).
Tighten the screws (14).
Tightening torque
Screw
Fit the bracket (13).
Tighten the screws (12).
Tightening torque
Screw
Fit the hub carrier (A).
Attach the hub carrier (A) to the lower arm (D).
Clean the ball joint head and the relative seat
thoroughly.
Fit the relative washer and pre-tighten the nut (11).
Tightening torque
Nut (pretightening)
Loosen and tighten the nut (11).
Tightening torque
Nut
Page 4 of 11
Nm
Class
9 ÷ 12 Nm
B
Nm
Class
9 ÷ 12 Nm
B
Nm
Class
90 Nm
A
Nm
Class
63 Nm
A