Steering box
Fit the water recirculation pump (F), complete with
mounting bracket, in the relative seat, after
installing the steering box (A) correctly.
Tighten the two screws indicated fastening the
recirculation pump mounting bracket (F).
Tightening torque
Screw
Refit the cable retainer clamp (6) on the steering
box (A).
Fit the mounting (4) and the relative shim (5) on the
steering box (A).
On the right hand side, tighten the indicated screws
fastening the steering box (A) to the chassis.
Page 5 of 8
Nm
Class
9 Nm
B