Output Parameter (Selective Branch); Timeout (Selective Branch) - Omron FH-3 Series Reference Manual

Output Parameter (Selective Branch)

Specifies whether or not the judgement results of this processing unit is reflected in the scene overall judgement.
1
Click [Output parameter] in the Item Tab area.
2
Select the "Reflect to overall judgement".
Setting item
Reflect to overall
judgement

Timeout (Selective Branch)

Set the conditions under which the branching processing times out.
1
In the Item Tab area, click [Timeout].
2
In the "Timeout" area, specify a value for each item.
Setting item
Use timeout
Setting time
866
Selective Branch
Setting value
[Factory default]
• [ON] Specify whether or not the judgement results of this processing unit is
• OFF reflected in the scene overall judgement.
Setting value
[Factory default]
• Unchecked
• [Checked]
1 to 3600 [60]
Description
Description
Click on the [Use timeout] checkbox to turn it ON if you
want the selective branching to time out after a set
amount of time passes.
This can be set when the "Use timeout" checkbox is
selected.
Set the length of time until the measurement process
times out on the selected processing unit in seconds.
When the measurement process for this processing unit
is executed, a timeout occurs once the amount of time
that passes since the start of the measurement exceeds
the set [Setting time]. If a timeout occurs to disrupt the
measurement process, the judgement results in NG.
FH/FZ5 Processing Item Function Reference Manual