Omron FH-3 Series Reference Manual page 593

Setting item
[Factory default]
S [0] to [255]
V [0] to [255]
• Checked
Exclude this color
• [Unchecked]
• [Black]
• White
Background color • Red
• Green
• Blue
• [OFF]
Fill profile • Fill profile
• Filling up holes
• [Binary image]
Output image
• All color image
• Measurement
image
• [All color image]
Display
• Selected color
image
• Binary image
FH/FZ5 Processing Item Function Reference Manual
Setting value
Set the saturation (difference in saturation).
Set the vividness (difference in vividness).
To exclude a selected color extraction range from the extracted colors, select
"Exclude this color".
Set the color used to cover background color parts other than the color to be
extracted.
When "Color selected image" is selected in "Display", the background color
can be set for each selected color. When "All color image" is selected in
"Display", background color parts are covered with the background color of
Color 0.
Set the fill method for filling a central blank part of an image.
• OFF
Do not fill central blank part.
• Fill profile
As the extracted color, measure the interval between the extract color start
point and extract color end point in the direction of the X axis in the
measurement region. Filling only takes place in the direction of the X axis,
and thus this method is faster than "Filling up holes".
• Filling up holes
Fill the blank "donut hole" surrounded by the extracted color with the
extracted color
Set the image that is output after filtering by the Extract Color filter.
Set the image that you want to display in the settings screen.
Description
Advanced Filter
3
591