Omron FH-3 Series Reference Manual page 153

For monochrome cameras:
For a monochrome camera only, the circle
color parameters are displayed.
Setting item
Circle brightness
4
Set up the judgement condition.
Note
• The values beside each item are measurement results of the displayed image. Take these values into
consideration to determine the upper and lower limits.
Setting item
Measure pos X
Measure pos Y
Evaluation
Radius
Search count
5
Perform the display setting if required.
Setting item
Display parameter
FH/FZ5 Processing Item Function Reference Manual
Set value
[Factory default]
• [Both]
• White This sets the circle color with the brightness.
• Black
Set value
-99999.9999 to 99999.9999
-99999.9999 to 99999.9999
0 to 100
0 to 99999.9999
0 to 256
Set value [Factory default]
• [None]
• Radius
• Evaluation
Description
Description
Specify the range of X-axis shifting that is judged to be
OK.
Specify the range of Y-axis shifting that is judged to be
OK.
Specify the range of circle evaluated values that are
judged to be OK.
Set the range of radiuses that is judged to be OK.
Specify the range of quantities that is judged to be OK.
Description
Select the type of measurement result to display on the
image. The display setting applies only to the settings
dialog box.
2
151
EC Circle Search