Omron FH-3 Series Reference Manual page 277

3
If necessary, set each item in the "Noise
removal" area.
Setting item
Noise level
Noise width
Filter strength
4
In the "Sub-region detail" area, set
enable or disable measurement as
required.
Setting item
Check No. range
FH/FZ5 Processing Item Function Reference Manual
Set value
[Factory default]
• For color cameras
3 to 442 [5] When detection is affected by noise, increase this value.
• For monochrome Reference:
cameras the "Vision System FH/FZ5 Series User's Manual (Z365)"
0 to 255 [5]
Set the width for judging noise.
0 to 9999 When detection is affected by noise, increase this value.
[0] Reference:
the "Vision System FH/FZ5 Series User's Manual (Z365)"
If a valley appears in the histogram around the edge threshold value due
0 to 100 to noises, smoothen the edge profile using a filter to prevent wrong error
[0] detection from being detected.
Strengthening the filter smoothen the edge profile further.
Set value
[Factory default]
Specify the edge measurement number for which to perform batch
0 to 359 reversing of the enable or disable measurement setting.
[0] to [359] Click [Check reverse] to reverse the check box settings of the edge
measurement number within the range.
Description
 "Appendixes Measurement Mechanism Noise Level" in
 "Appendixes Measurement Mechanism Noise Width" in
Description
Circular Scan Edge Position
2
275