Omron FH-3 Series Reference Manual page 688

Setting item
Field separator
Record separator
Set comment as title
3
If necessary, set the save destination of
the logging data.
Setting item
Destination setting
Sub folder name
Prefix
Note
• The actual data output is in the ASCII format with the following type of header added.
Measurement ID, Data1 Data N + delimiter
Measurement ID : measurement time YYYY-MM-DD_HH-MM-SS-XXXX
(YYYY: Calendar, MM: Month, DD: Day, HH: Hour, MM: Minute, SS: Second, XXXX: Millisecond and Line number.)
Example
Measurement time: 11:10:25.500 AM, December 24, 2007 and Line 0, the measurement ID is "2007-12-24_11-10-25-
5000".
• Logging timing and saving destination
Reference: "Chapter 3 Performing Test Measurement/Starting Operation Useful Functions for Operation Logging
Measurement Values and Measurement Images" in the "Vision System FH/FZ5 Series User's Manual (Z365)"
686
Data Logging
Set value
[Factory default]
• OFF
• [Comma]
• Tab
• Space
• CR+LF
• OFF
• Comma
• Tab
• Space
• [CR+LF]
• [Unchecked]
• Checked
Setting value
[Factory default]
• Checked
Place a check here to set the destination and prefix.
• [Unchecked]
Sets sub folder names. Creates a sub folder in the save destination in
system logging settings. (Max: 32 characters)
-
The following characters cannot be set.
\ / : * ? " < > ?
Sets the prefix for the save file name. (Max: 32 characters)
The set character string is added at the beginning of the name of the save
- file.
The following characters cannot be set.
\ / : * ? " < > ?
Description
Select the separator for output data.
Select the separator each time data is output.
Place a check here to output comments as the titles on the first
line of the data logging file.
Description
FH/FZ5 Processing Item Function Reference Manual