Omron FH-3 Series Reference Manual page 30

Item
• FZ-SC/S/SHC/SH
• FZ-SC2M/S2M/SC5M2/S5M2/SF□/SP□
Gain
• Z-SQ□□□□
Important
• When an Intelligent Compact Digital camera, FZ-SQ, is connected, we recommend setting the gain value to 16 for
stable operations. Measurement values may be different if the recommended value is exceeded. Be sure to thoroughly
check the measurement result and set the gain value.
Frame/Field - for Monochrome Cameras Only
There are two methods to transfer one image from a camera to the sensor controller: frame read and field read.
Frame read is to read all of the scanned lines of the image. The result is called a frame image. Field read is used
to read half of the interlaced scanned lines of the image. The result is called the field image.
Here, select the unit to be treated as one image.
Odd scan lines
Field Image
Resolution: 512 (H) × 242 (V)
Frame Image
Resolution: 512 (H) × 484 (V)
1
In the Item Tab area, click [Camera setting].
28
Camera Image Input
Set value
[Factory default]
0 to 230 [85]
0 to 230 [50]
16 to 64 [16]
Even scan lines
Resolution: 512 (H) × 242 (V)
Adjust the camera gain when the shutter
speed, the lens aperture, and lighting
conditions cannot be used to brighten the
image. Usually, the factory default value can
be used.
Image with every other line
Two field images are composed to make a
frame image.
FH/FZ5 Processing Item Function Reference Manual
Description