4
When Circumference is selected, set the
items in the "Circle setting" area.
When Wide arc is selected, detailed settings
are not required.
Setting item
Cut out angle
Overlap
140°
(overlap angle)
120°
Overlap area
(clipping start angle)
5
Place a check at [Disp transferred
image].
Displays the polar transformed image in the
image window.
The vertical and horizontal image sizes (in
pixels) are displayed overlapped.
FH/FZ5 Processing Item Function Reference Manual
Set value
[Factory default]
Set the angle for starting extraction when the figure is a wide
[0] to 359
circle.
Set the angle for overlap when the figure is a wide circle.
The overlap angle indicates the end angle of the measurement
[0] to 180
range.
This is set to measure extra overlapping from the start angle.
Basically, set this larger than the extraction angle.
0°
Description
Polar Transformation
3
541