Machine Setting (Calc Axis Move) - Omron FH-3 Series Reference Manual

List of Calc Axis Move Items
Item name
Select a processing item (stage data or robot data) under which external device information needed for
Machine setting calculation of axis movement amount is held.
Reference: Machine Setting (Calc Axis Move) (p.786)
Set the reference position/angle and measurement position/angle using an arithmetic expression. If
multiple cameras are used, the setting data can be created easily by using the position/angle calculation
Calc. parameter
processing items.
Reference: Calc. Parameter (Calc Axis Move) (p.787)
Judgement This item specifies the judgement condition for measurement results.
condition Reference: Judgement Condition (Calc Axis Move) (p.791)
This item can be changed if necessary.
Output Set whether or not the judgement results of this processing unit is reflected in the scene overall
parameter judgement.
Reference: Output Parameter (Calc Axis Move) (p.792)

Machine Setting (Calc Axis Move)

Select a processing item (stage data or robot data) under which external device information needed for
calculation of axis movement amount is held.
1
In the Item Tab area, click [Machine setting].
2
Select the reference scene No. and
reference unit No.
Information of the selected processing unit is
displayed in the reference data display area.
Displayed contents differ depending on
selected type of Robot or Stage.
Setting item
Reference scene
No.
Reference unit No.
Note
• If the number of scenes is increased using the scene group conversion tool, the maximum value that can be
selected in "Reference scene No." changes.
786
Calc Axis Move
Setting value
[Factory default]
Select a scene number (stage data or robot data) under which external
[Present scene]
device information needed for calculation of axis movement amount is
Scenes 0 to 127
held.
From among the referenced scene numbers, select a processing item
- (stage data or robot data) under which external device information
needed for calculation of axis movement amount is held.
Description
Description
FH/FZ5 Processing Item Function Reference Manual