Omron FH-3 Series Reference Manual page 307

No. Data name
258 Edge number (line 1)
259 Edge level (line 1)
260 Noise level (line 1)
261 Noise width (line 1)
262 Edge color level (line 1)
Monochrome edge detection mode
263
(line 1)
264 Edge level absolute value (line 1)
Edge level specification method (line
265
1)
266 Scan sub-region (line 1)
267 Filter size (line 1)
268 Display range (line 1)
269 Noise cancel (line 1)
270 Measure type (line 1)
271 Fix region count (line 1)
Monochrome derivation edge
272 detection mode
(line 1)
273 Upper limit of edge level (line 1)
Upper limit absolute value of edge
274
*4
level (line 1)
275 Filter strength (line 1)
276 Extraction ratio (line 1)
Reference unit number for reference
278
coordinate
Reference type of reference
279
coordinate
Use coordinates before position
280
compensation
Coordinate X before position
281
compensation
Coordinate Y before position
282
compensation
*1: The reference coordinates based on the selection in the Method area of the [Ref.setting] tab can be Get only.
*2: The reference coordinates based on the selection of Numerical in the Method area of the [Ref.setting] tab can be Set/Get.
*3: On the [Measurement] tab of the Properties Dialog Box, this data is displayed as [Edge Upper] when you choose the [Position
(%) for width of a color].
*4: On the [Measurement] tab of the Properties Dialog Box, this data is displayed as [Edge Upper] when you choose the [Value
(442 at the maximum) of color].
FH/FZ5 Processing Item Function Reference Manual
Set/Get
Set/Get 0 to 99
Set/Get 0 to 100
Set/Get 0 to 442
Set/Get 0 to 9999
Set/Get 0 to 442
0: Light→Dark
Set/Get
1: Dark→Light
Set/Get 0 to 442
0: %
Set/Get
1: Absolute value
Set/Get 1 to 100
Set/Get 1 to 1000
Set/Get 0 to 99
0: OFF
Set/Get
1: ON
0: Projection
Set/Get
1: Differential
0: Not fixed
Set/Get
1: Fixed
0: Absolute value
1: Dark → Light
Set/Get
2: Light → Dark
*3
Set/Get 0 to 100
Set/Get 0 to 442
Set/Get 0 to 100
Set/Get 0 to 100
Set/Get -1 to 9999
0: Set by number
Set/Get
1: Unit reference
0: Not used
Set/Get
1 : Used
Get only -99999.9999 to 99999.9999
Get only -99999.9999 to 99999.9999
Data range
Intersection
2
305