Sampling (Camera Calibration) - Omron FH-3 Series Reference Manual

3
Click [Generate calibration parameters].
The calibration parameters will be generated.

Sampling (Camera Calibration)

Make the calibration setting based on the measurement results. After measuring a position using the
measurement processing items in the measurement flow, set the position as an actual coordinates to calculate
calibration data.
1
In the Item Tab area, click [Sampling].
2
Set the [Sampling] area.
Setting item
XY specification
method
X specification
Y specification
3
Click [Model] and [Region] as needed to set sampling measurement conditions.
4
Click [Sampling measurement].
FH/FZ5 Processing Item Function Reference Manual
Setting value
[Factory default]
Different:
• [Different]
Same:
• Same
• Processing Unit that can
measure positions during Select the Processing Unit in the measurement flow used to
the measurement flow. sample the X coordinate.
• [None]
• Processing Unit that can Select the Processing Unit in the measurement flow used to
measure positions during sample the Y coordinate.
the measurement flow. If "Same" is specified as the XY specification method, this cannot
• [None] be selected.
Description
Set X and Y individually.
Use the measurement results of the Processing Unit
selected for X specification to specify Y.
4
817
Camera Calibration