Settings Flow (Control Flow Normal)
Set up control flow normal according to the following steps.
Necessary Steps
Start
Settings (Control Flow Normal)
Settings completed
Test measurement
List of Control Flow Normal Items
The following items can be set in control flow normal.
Item name
Set communication and timeout conditions for controlling the measurement flow.
Setting
Reference: Settings (Control Flow Normal) (p.842)
You can set this item to change the output parameters.
Output
Set the conditions and parameters for outputting measurement results to other processing units or
parameter
external devices.
Reference: Measurement Results for Which Output Is Possible (Control Flow Normal) (p.844)
Settings (Control Flow Normal)
Set communication and timeout conditions for controlling the measurement flow.
1
In the Item Tab area, click [Setting].
2
In the "Communication method" area,
specify a value for each item.
Setting item
Communication method
842
Control Flow Normal
Optional Steps
Output Parameters (Control Flow Normal)
Check results/adjust parameters
Description
Setting value
[Factory default]
• [RS-232C/RS-422]
Select the communication method used for controlling
• Ethernet
the measurement flow from an external device.
FH/FZ5 Processing Item Function Reference Manual
Description