Settings Flow (Plc Master Calibration) - Omron FH-3 Series Reference Manual

Settings Flow (PLC Master Calibration)

Set the PLC master calibration with the following steps.
Make sure to set
Start
Machine setting
(PLC Master Calibration)
Calibration
(PLC Master Calibration)
Sampling Setting
(PLC Master Calibration)
Settings complete
Test measurement
List of PLC Master Calibration Items
Item name
Machine setting
Calibration
Sampling setting
Calibration result
768
PLC Master Calibration
Select a processing item (stage data or robot data) under which external device information needed for
calculation of axis movement amount is held.
Reference: Machine Setting (PLC Master Calibration) (p.769)
This item sets data related to calibration. Sets the number of calibration data to be created and the
measurement processing items to be used for sampling in the arithmetic expression.
Reference: Calibration (PLC Master Calibration) (p.769)
This item sets data related to sampling.
Set the number of samplings and the actual coordinate positions for each sampling.
Reference: Sampling Setting (PLC Master Calibration) (p.771)
The created calibration data is displayed in this item. The calibration data can be adjusted directly
using the Edit function.
It is also possible to confirm the sampling data used for the calculation.
Reference: Calibration Result (PLC Master Calibration) (p.772)
Set as necessary.
Calibration result
(PLC Master Calibration)
Check results/make adjustments
Description
FH/FZ5 Processing Item Function Reference Manual