Omron FH-3 Series Reference Manual page 69

4
Set the actual coordinates for the
specified point.
The actual coordinate input window is
displayed.
Actual coordinate
Point coordinate X, Y
Actual coordinate X, Y
5
Set the 2nd and 3rd points in the same way.
6
Click [Generate calibration parameters].
The calibration parameters will be generated.
Setting Calibration through Sampling Measurement (Sampling)
This is a method for setting calibration based on measurement results.
Calibration parameters are calculated automatically when a registered model is searched and the actual
coordinates for that position set.
1
In the Item Tab area, click [Calibration].
2
In the "Calibration setting" area, select
"Sampling".
3
In the "Sampling" area, click [Register
model].
4
Use the Drawing tools to register the
model.
5
Set a search region as necessary.
The default value setting is for the entire
screen.
FH/FZ5 Processing Item Function Reference Manual
Setting value [Factory default]
0 to 9999.9999
[Point you clicked in the window]
-99999.9999 to 99999.9999
[0]
67
Camera Image Input FH
1