Omron FH-3 Series Reference Manual page 539

5
This sets the filter settings.
Setting item
Direction
Filter Size
6
Set the details.
Correction method: For "Thick stripe off"
Setting item
Defect brightness
Gain
Offset
FH/FZ5 Processing Item Function Reference Manual
Setting value
[Factory default]
• [Normal]
• Vertical
• Horizontal Specify the filter direction.
• Upper right
• Lower right
The value is set based on the size of the defect to be extracted or
the size of the stripes. Only an odd number value can be specified.
3 to 63 For "Pinstripe off":
[3] Select a filter size larger than the width of the striped pattern.
For "Thick stripe off":
Select a filter size larger than the size of the defect to be detected.
Setting value
[Factory default]
• [Light and darkness] Set the brightness of defects to be extracted from the background.
• Light To detect both white defects and black defects, select "Light and
• Darkness darkness".
Adjust the contrast of an image after the pattern suppression.
1 to 63
Specifying a larger value emphasizes the density differences
[1]
within the image.
0 to 255 Adjust the brightness of an image after the pattern suppression.
[128] Specifying a larger value increases the brightness of the image.
Description
Description
Stripes Removal Filter II
3
537