Omron FH-3 Series Reference Manual page 362

Creating a dynamic mask
1
In the Mask setting area, select
"Dynamic mask".
2
Set the unit number and image data
number in the Unit reference area.
Setting item
Unit No.
Image data No.
Setting display
Perform the display setting if required.
Setting item
Image type
Mask region color
360
Defect
Setting value
[Factory default]
Set the number of the unit being referred to for the mask region.
The reference unit should be able to output binarized images.
-
For example, select a labeling filter processing image for advanced
filtering.
0 to 3 If the unit supports advanced filtering, numbers 0 to 3 can be set.
[0] Otherwise, it is fixed to 0.
Setting value
[Factory default]
• Measure image
• Mask binary image
• [Mask and image]
• [Black]
• White
• Red
• Green
• Blue
Description
Description
Select the type of an image to be displayed.
Measure image: Measured image
Mask binary image: Binarized image for masking
Mask and image: Post-masking image
Select the display color of the mask region.
A part of color which is specified in [Mask region color] is not
measured.
FH/FZ5 Processing Item Function Reference Manual