Omron FH-3 Series Reference Manual page 57

Electronic flash controller FZ-LTA100 is connected:
Electronic flash controller FZ-LTA200 is connected:
0 + 1CH are used:
Setting value
Item
[Factory default]
Pattern select Pattern 0 to 16
• [Checked]
CH
• Unchecked
0 to 255
Adjustment
[128]
FH/FZ5 Processing Item Function Reference Manual
0CH is used:
Select from a preset lighting pattern.
Place a check here to enable the channel currently selected in the part list.
When 1 channels are used, the light volume can be adjusted to one of 256
levels. When 2 channels are used, the light volume can be adjusted to one of
128 levels. 0 indicates the lighting is OFF. The larger the number, the higher
the brightness.
1CH is used:
Description
Camera Image Input FH
1
55