Output Parameters (Control Flow Parallel); Key Points For Test Measurement And Adjustment (Control Flow Parallel) - Omron FH-3 Series Reference Manual

Output Parameters (Control Flow Parallel)

You can set this item to change the output parameters.
The output parameters are the conditions and parameters for outputting measurement results to other
processing units or external devices. Normally, the factory default values can be used.
1
Click [Output parameter] in the Item Tab area.
2
Specify a value for each item.
Setting item
Reflect to the overall
judgement

Key Points for Test Measurement and Adjustment (Control Flow Parallel)

You can adjust the parameters while you perform test measurements and check the measurement results to
increase the measurement precision and speed.
Select the adjustment method by considering the following point.
For the display of measurement results and the results that are output, check Reference: Measurement
Results for Which Output Is Possible (Control Flow Parallel) (p.856).
Items Displayed in the Detail Result Area
The following measurement results are displayed in the "Detail result" area as text.
Displayed item
Judge
Items Displayed in the Image Display Area
You can specify a sub-image number to display the next image in the image display area.
Sub image number
0
FH/FZ5 Processing Item Function Reference Manual
Setting value
[Factory default]
• [ON]
• OFF
Displays the judgement result for the processing unit.
The measurement image appears.
Description
Set whether the judgement result from this processing unit is
applied to the overall scene judgement.
Description
Description
855
Control Flow Parallel
5