Output of Character string with Non-procedure Communications
Check the [Character output] in Output parameter to output the character string with Non-procedure
communication.
Reference: Output Parameters (Character Inspection) (p.394)
1
Output Format
Take the following case as an example. Number of measurement is one.
Reading character string is 32. Command, Response, and Data Output area are
Reference: Non-procedure Communications and MEASURE or M in Non-procedure Command Details
in Vision System FH/FZ5 Series User's Manual for Communications Settings (Z342).
Command (PLC to Sensor Controller)
R
M
E
A
S
U
Response (Sensor Controller to PLC)
C
O
K
R
0123456789...UV(Character string data)
Note
• If no character string, refer to the following.
C
O
K
R
C
R
FH/FZ5 Processing Item Function Reference Manual
C
C
M
E
or
R
R
C
R
397
Character Inspection
2