Measurement Results For Which Output Is Possible (User Data); External Reference Table (User Data) - Omron FH-3 Series Reference Manual

Items Displayed in the Detail Result Area
The following measurement results are displayed in the "Detail result" area as text.
Displayed item
Judge
Items Displayed in the Image Display Area
You can specify a sub-image number to display the next image in the image display area.
Sub image number
0

Measurement Results For Which Output Is Possible (User Data)

The measurement results provided by user data are shown below. The measurement results appear in the
"Detail Result" area, and you can also use result output processing items to output the measurement results to
an external device.
Refer to the "External Reference Tables" for the parameters that can be referenced, including measurement
results.
(Reference: External Reference Table (User Data) (p.649))
Measurement item
Judge
Setting data 00 to Setting
data 99
Note
• When a calculation expression is not set in the setting data, the raw values of the user data can be acquired as
measurement results. When a calculation expression is set, you can acquire as measurement results the user data
values with the calculation results applied.

External Reference Table (User Data)

By specifying a number, you can access the following data from processing items that support processing unit
data setting/acquisition, and from control commands.
No.
0 Judge
200+N
User Data
(N=0 to 99)
1000 to 1099 Calculation result
FH/FZ5 Processing Item Function Reference Manual
Displays the judgement result for the processing unit.
The measurement image appears.
Character string
JG The judgement result for the processing unit
DT00 to DT99 Values of user data 00 to User data 99
Data name Set/Get
Get only
Set/Get
Get only
Description
Description
Description
Data range
0: No judgement (unmeasured)
1: Judgement result OK
-1: Judgement result NG
Expression character string
-999,999,999.9999 to 999,999,999.9999
4
649
User Data