Omron FH-3 Series Reference Manual page 546

3
Set the reference position.
Setting item
Setting method
When Operation is chosen
Click [Edit].
Click [...] and set the expression.
Reference: Layout of Setting Expression
Window (p.621)
4
Set the measure position.
Setting item
Setting method
5
Set the display settings as necessary.
544
Trapezoidal Correction
Set value
[Factory default]
Set the method for setting the reference position.
When fixed value is selected, specify the vertex position on the
• [Figure]
image.
• Operation
After setting with an expression, if the setting is changed to a fixed
value, the result of the expression is reflected as a fixed value.
Set value
[Factory default]
Set the method for setting the measurement position.
When fixed value is selected, specify the vertex position on the
• [Figure]
image.
• Operation
After setting with an expression, if the setting is changed to a fixed
value, the result of the expression is reflected as a fixed value.
Description
Description
FH/FZ5 Processing Item Function Reference Manual