Omron FH-3 Series Reference Manual page 423

5
Make the display settings for read-in
character strings.
Setting item
Display of decoded
characters.
Color
Size
6
To read codes containing group separators, set a group separator replacement condition.
Setting item
Replace group
separator with specified
character string
Replacement character
string
Note
Replacing each group separator (control character) with the specified character string enables codes containing
group separators to be read and compared to a comparison character string.
7
When the setting has been changed,
click [Measure] in the "Detail" area to
verify whether measurements can be
made correctly.
8
Set up the judgement condition.
Setting item
Character count
Verification string
'*' '?' is treated as
character data.
FH/FZ5 Processing Item Function Reference Manual
Set value
[Factory default]
• [Unchecked] Place a check when displaying the read-in character strings on the
• Checked screen.
• Black
• White
• Red Specify the color of characters displayed on the screen.
• [Green]
• Blue
10 to 200
Set the display size for character strings.
[24]
Set value
[Factory default]
• [Checked] If you select [Normal] for the reading mode, check this checkbox to
• Unchecked replace each group separator with another character string.
--- Set the character string to replace group separators with.
Set value
0 to 652 Specify the character count to be judged as OK.
Specify the classification strings to be judged as OK.
---
Up to 652 characters can be set.
Checked: '*' and '?' are handled as normal characters.
• Checked Unchecked: '*' and '?' are handled as special characters.
• [Unchecked] '*': Substitution for character string (with 0 or more characters)
'?': Substitution for 1character
Description
Description
Description
2
421
2D Code