Changing the 2 Images Operation Settings
You can change the settings for the filter that operates on paired pixel values of two images.
Setting item
[Factory default]
• [Calculation]
Operation type
• Bit operation
• [Add]
• Subtraction
• Subtraction
(absolute)
• Multiplication
Operation mode
• Multiplication
(Normalization)
• Average
• Maximum
• Minimum
• [AND]
• OR
• XOR
Operation mode
• NAND
• NOR
• XNOR
FH/FZ5 Processing Item Function Reference Manual
Setting value
Set the type of operation that is used for 2 images operation.
This can be set when "Calculation" is selected for "Operation type".
Set the operation method.
This can be set when "Bit operation" is selected for "Operation type".
Set the operation method for bit operation.
Description
Advanced Filter
3
587