Settings Flow (Control Flow Fieldbus); Settings (Control Flow Fieldbus) - Omron FH-3 Series Reference Manual

Settings Flow (Control Flow Fieldbus)

Set up control flow Fieldbus according to the following steps.
Necessary Steps
Start

Settings (Control Flow Fieldbus)

Settings completed
Test measurement
List of Control Flow Fieldbus Items
The following items can be set in control flow Fieldbus.
Item name
Set communication and timeout conditions for controlling the measurement flow.
Setting
Reference: Settings (Control Flow Fieldbus) (p.858)
You can set this item to change the output parameters.
Output Set the conditions and parameters for outputting measurement results to other processing units or
parameter external devices.
Reference: Measurement Results for Which Output Is Possible (Control Flow Fieldbus) (p.860)
Settings (Control Flow Fieldbus)
Set communication and timeout conditions for controlling the measurement flow.
1
In the Item Tab area, click [Setting].
2
In the "Communication method" area, specify a value for each item.
Setting item
Communication method
858
Control Flow Fieldbus
Optional Steps
Output Parameters (Fieldbus Flow Control)
Check results/adjust parameters
Description
Setting value
[Factory default]
Select the communication method used for controlling
• [EtherNet/IP]
the measurement flow from an external device.
• EtherCAT
"EtherCAT" can only be selected on the FH.
FH/FZ5 Processing Item Function Reference Manual
Description