Transfer Parameter (Transfer Position Data) - Omron FH-3 Series Reference Manual

Transfer Parameter (Transfer Position Data)

The item sets data related to conversion. Sets a calculation formula using the pre-conversion position and axis
position and post-conversion axis position.
1
Click [Transfer parameter] in the Item Tab area.
2
Set each item in the Current point
position area.
Setting item
Position X
Position Y
Position angle
3
Set each item in the Current axis position area before conversion.
Set how far each axis moved from the origin return state (all axes are at the origin point) when [Current
angle] is measured.
If the stage type of the reference data is
the XY stage or the robot type is 3-axis
robot
Setting item
X-axis
Y-axis
If the stage type of the reference data is
the XYθ stage, θXY stage or the robot
type is 4-axis robot
Setting item
X-axis
Y-axis
θ-axis
778
Transfer Position Data
Setting value
[Factory default]
Set the calculation formula that obtains the position X of the conversion
-
target.
Set the calculation formula that obtains the position Y of the conversion
-
target.
Set the calculation formula that obtains the angle of the conversion target.
-
To convert positions X and Y only, set 0 as the angle.
Setting value
[Factory default]
- Set how far the X axis position moved from the origin.
- Set how far the Y axis position moved from the origin.
Setting value
[Factory default]
- Set how far the X axis position moved from the origin.
- Set how far the Y axis position moved from the origin.
- Set how far the θ axis position moved from the origin.
Description
Description
Description
FH/FZ5 Processing Item Function Reference Manual