Omron FH-3 Series Reference Manual page 598

3
Click [OK].
• [OK]: Changes the settings and returns to the previous menu.
• [Cancel]: Changes are discarded. Returns to the previous menu.
4
Change the display settings in the Image Display area if necessary and check the settings.
Setting item
Display setting
● Image subtraction filter setting window for multiple images
1
Select [Model image] in the Image Subtraction area.
Different screens are displayed according to the settings for the image subtraction model image.
Setting item
Model image
596
Advanced Filter
Setting value
[Factory default]
Set the image to be displayed in the Image Display area.
• [Filtered image]
Filtered image: An image to be filtered is displayed.
• Model image
Model image: A registered model image is displayed.
• Difference image
Difference image: A difference image is displayed.
Setting value
[Factory default]
Select to generate a model image for image subtraction using a single
image or multiple images.
• Single image
Model image is generated using a single image. Select this when you
want to subtract the difference of a target image from a single model
• [Single image] image.
• Multiple images • Multiple images
Model image is generated using multiple images. Select this when
there is variation in the measured image that occurs each time an
image is captured. A model is created from multiple image captures
and this minimizes variation in the subtracted difference image from the
model.
Description
Description
FH/FZ5 Processing Item Function Reference Manual