Camera Calibration; Settings Flow (Camera Calibration) - Omron FH-3 Series Reference Manual

Vision sensor fh/fz5 series

Hide thumbs Also See for FH-3 Series:

Table of Contents

Camera Calibration

By setting the camera calibration, the measurement result can be converted and output as actual dimensions. It

allows users to perform more flexible adjustment and edit using the measurement flow compared to the

calibration function provided as the camera image input processing item.

• The sampling function can be used in combination with the Measurement Processing Unit in the measurement flow.

• Scaling can be calculated from the measured work width and actual work width.

• Generated calibration data can be adjusted or edited.

Used in the Following Case

• When you want to output the measurement result of a Processing Unit as actual dimensions

Example) When you want to output the measurement result of the Processing Unit as actual

Set the camera calibration with the following steps.

Make sure to set

Specify point/Value appointment/Sampling/

Dimension measure (Camera Calibration)

Settings complete

Test measurement

FH/FZ5 Processing Item Function Reference Manual

Set as necessary.

Data Display (Camera Calibration)

Check results/make adjustments

Show Quick Links

Table of Contents