Omron FH-3 Series Reference Manual page 43

6
Click [Sampling measurement].
Measurement is performed.
The search result (cross-shaped cursor) is
displayed in the Image Display area, and the
Sampling Coordinate window is displayed.
7
In the Sampling Coordinate window,
enter the X and Y values.
8
Click [OK].
Point coordinates and actual coordinates are
registered in the "Sampling" area.
9
Move the object to be measured and repeat the Steps Reference:
(p.41).
10
Click [Generate calibration parameters].
The calibration parameters will be generated.
FH/FZ5 Processing Item Function Reference Manual
 3 (p.40) to Reference:
Camera Image Input
1
 8
41