Settings Flow (Camera Image Input Fh) - Omron FH-3 Series Reference Manual

Settings Flow (Camera Image Input FH)

To set camera image input, follow the steps below.
Set as necessary.
Select the camera to set
*Always do this when using multiple cameras
Camera Selection (Camera Image Input FH)
Camera Settings (Camera Image Input FH)
Screen Adjust Settings (Camera Image Input FH)
White Balance (Camera Image Input FH)
Calibration (Camera Image Input FH)
Settings complete
Test measurement
List of Camera Image Input FH Items
Item name
Camera 0 to 7
Select camera
Camera setting
Screen adjust
White balance
Calibration
FH/FZ5 Processing Item Function Reference Manual
Start
Select the camera to be set.
When multiple cameras are connected, select the camera to use for measurement.
Specify the camera settings such as the shutter speed or electronic flash.
Reference: Camera Settings (Camera Image Input FH) (p.46)
Set the adjustment of the lighting and the lens.
Reference: Screen Adjustment Settings (Camera Image Input FH) (p.54)
When using a color camera, set the white balance.
Reference: White Balance (Camera Image Input FH) (p.64)
Set when measurements (camera coordinate measurement values) are to be output using
actual dimensions. Select the calibration setting method and generate the calibration
parameters.
Reference: Calibration (Camera Image Input FH) (p.66)
Check results/make adjustments
Description
45
Camera Image Input FH
1