Vision Master Calibration - Omron FH-3 Series Reference Manual

Vision Master Calibration

This processing item is specifically provided for calibration between the camera coordination system and the
control equipment coordinate system.
This processing item automatically calculates the entire axis movement amount of the control equipment
necessary for calibration.
For that reason, it possible to perform accurate calibration more easily than previously.
Important
• The calibration data created with this processing item is referred to using [Calibration Data Reference].
Unlike other calibration-related processing items, note that this processing item cannot use the calibration data on its
own.
• This function refers to the processing item having external device information for axis movement calculation, e.g. Stage
Data or Robot Data. If you change those data, setting contents of this function will be changed. In this case, needs to
check those data.
Used in the Following Case
• When you want to position the FPD panel
FH/FZ5 calculates the axis movement amount of stages required for calibration, and outputs it to PLC.
744

Vision Master Calibration

Camera 1
Camera 0
Stage Axis control of stage
FH
Response + axis movement
amount of stage
Trigger input
PLC
FH/FZ5 Processing Item Function Reference Manual