Omron FH-3 Series Reference Manual page 782

Selects Y-axis as movement axis when
Xθ(Yθ) or θX(θY) Stage are set in
reference data.
Setting item
Y-axis
θ-axis
4
Set each item in the Transferred axis position area.
Set how far each axis in the "Post-correction position/angle" moved from the origin return state (all axes
are at the origin point).
If the stage type of the reference data is
the XY stage or the robot type is 3-axis
robot
Setting item
X-axis
Y-axis
If the stage type of the reference data is
the XYθ stage, θXY stage or the robot
type is 4-axis robot
Setting item
X-axis
Y-axis
θ-axis
If the stage type of the reference data is
the UVW stage
Setting item
U-axis
V-axis
W-axis
780
Transfer Position Data
Setting value
[Factory default]
- Set the measurement distance of Y-axis from homign operation.
- Set the measurement distance of θ-axis from homign operation.
Setting value
[Factory default]
- Set how far the X axis position moved from the origin.
- Set how far the Y axis position moved from the origin.
Setting value
[Factory default]
- Set how far the X axis position moved from the origin.
- Set how far the Y axis position moved from the origin.
Set how far the θ axis position moved from the origin.
-
Setting value
[Factory default]
- Set how far the U axis position moved from the origin.
- Set how far the V axis position moved from the origin.
- Set how far the W axis position moved from the origin.
Description
Description
Description
Description
FH/FZ5 Processing Item Function Reference Manual