Omron FH-3 Series Reference Manual page 218

4
Click [OK].
The model is registered and its central X and
Y coordinate values are displayed in the
"Setting model" area.
The image specified for the model is displayed
in the Image Display area.
Set the page in the Switch Page area to
display models with index numbers 36 or
more.
Note
Model Status and Measurement Processing
• Measurement time and accuracy may be affected by the status of model in the following ways. Please select
measurement objects that are in good condition (clean) for Model Registration.
• In the case of large or complicated models, processing time is prolonged.
• With extremely small models or models without features, search processing is unstable.
5
To register two or more models, repeat the Steps Reference:
(p.216).
Note
• When a model is registered, the central coordinates of the
model are registered as the detection point. A detection
point is a point output as a measurement value. If multiple
figures are combined, the central coordinates of the
circumscribed rectangle are registered.
216
Classification
 2 (p.215) to Reference:
Detection coordinate
Can be changed to an appreciate position.
Model
FH/FZ5 Processing Item Function Reference Manual
 4