Parameter Settings (Set Unit Figure) - Omron FH-3 Series Reference Manual

Parameter Settings (Set Unit Figure)

Up to 8 figures can be set for each set unit figure.
To set multiple figures for one target unit,
set different register figure Nos.
1
Click the target unit in the "Setting target
data" area and check the No. column.
2
In the "Data setting" area, click the
[Target unit] [ ] to select the target unit.
The target unit name in the "Setting target
data" area is also reflected automatically.
3
In the "Data setting" area, click the
[Register figure No.] [
figure to be registered.
Target figures included in the selected figure
are displayed.
The registered figure name in the "Setting
target data" area is also reflected
automatically.
4
Click the target figure whose data you
want to set and check the No. column.
5
Click the name of the data that you want
to rewrite.
6
Click [Edit] to set up the overwrite
details using an expression.
Reference: Layout of Setting Expression
Window (p.621)
7
Click [OK].
An area is displayed on the image based on settings.
FH/FZ5 Processing Item Function Reference Manual
] to select the
4
655
Set Unit Figure