External Reference Tables (Get Unit Figure) - Omron FH-3 Series Reference Manual

External Reference Tables (Get Unit Figure)

No.
0 Judge
1 Number of figures
2 Size of figures
120 Target processing unit No. Set/Get
121 Target figure No.
1000 + 100 × N Figure N type
(N = 0 to 9) (N = 0 to 9)
1001 + 100 × N
Figure N drawing mode
(N = 0 to 9) (N = 0 to 9)
1002 + 100 × N
Figure N data 00 to figure N
to
data 20
1022 + 100 × N
(N = 0 to 9)
(N = 0 to 9)
FH/FZ5 Processing Item Function Reference Manual
Data name Set/Get
Get only
Get only
Get only
Set/Get
Get only
Get only
Get only
Data range
0: No judgement (unmeasured)
1: Judgement result OK
-1: Judgement result NG
Number of figures acquired
Size of figures acquired
0 to 9999
0 to 999
Figure 0 type
0x0000→Undefined
0x0001→Point
0x0002→Line
0x0004→Wide line
0x0008→Rectangle
0x0010→Ellipse
0x0020→Circle
0x0040→Wide circle
0x0080→Arc
0x0100→Wide arc
0x0200→Polygon
Set to 0 if no figures are acquired.
Figure N drawing mode
Figure N data 0 to 20
The amount of valid data differs with data type.
Set to 0 if disabled or no figures are acquired.
4
661
Get Unit Figure