Omron FH-3 Series Reference Manual page 584

Setting item
Extraction condition
Extraction condition
upper/lower limit
Extraction condition
setting
Output image
582
Advanced Filter
Setting value
[Factory default]
• [None]
• Area
• X
• Y
• Elliptic major axis
• Elliptic minor axis
• Elliptic ratio
• Rectangle width
• Rectangle height Set the conditions for extracting a label.
• Rectangle X1 Up to three extraction conditions can be set.
• Rectangle Y1
• Perimeter
• Circularity
• Fit rect major axis
• Fit rect minor axis
• Inscribed circle R
• Circum. circle R
• Number of holes
[-999,999,999.9999] to
Set the upper limit and lower limit of the condition for extracting a label.
[999,999,999.9999]
Set the condition for combining extraction conditions.
• [AND]
• OR
• [Binary image] Appears when the settings are for a color image.
• All color image Set the image that is output as the image filtered by the labeling filter.
Description
• AND
Labels meeting all extraction conditions are extracted.
• OR
Labels meeting any one of the extraction conditions are extracted.
FH/FZ5 Processing Item Function Reference Manual