Camera Settings
Specify the camera gain and reverse conversion.
1
In the Item Tab area, click [Camera setting].
2
In the "Camera settings" area, specify
the camera gain and reverse conversion
settings.
Setting item
Gain
Mirror an
image
Important
With CMOS cameras, striped bands of noise can arise if the camera gain is set too high, a characteristic inherent in the
imaging element specifications.
A number of pixel defects may also occur; however, such defects should not cause problems with product defects or failure.
If having problems with striped bands of noise or pixel defects affecting the measurement results, lower the camera gain
setting or use a CCD camera.
74
Camera Image Input HDR
Setting value [Factory default]
• FZ-SC/S/SHC/SH
0 to 230 [85]
• FZ-SC2M/S2M/SC5M2/S5M2/SF/SP
0 to 230 [50]
• FH-SC02/SM02/SC04/SM04/SC12/SM12
0 to 255 [0]
• FH-SC05R/SM05R
0 to 63 [0]
• Checked
↑↓
• [Unchecked]
• Checked
←→
• [Unchecked]
Description
Set the camera gain when the shutter speed,
the lens aperture, and lighting conditions
cannot be used to brighten the image.
Usually, the factory default value can be used.
Place a check here when reversing the camera
image vertically.
Place a check here when reversing the camera
image horizontally.
FH/FZ5 Processing Item Function Reference Manual