Omron FH-3 Series Reference Manual page 816

Vision sensor fh/fz5 series

Hide thumbs Also See for FH-3 Series:

Table of Contents

List of Camera Calibration Items

Set a given pixel to make the calibration setting. Calibration parameters are calculated automatically when

Specify point

actual coordinates of specified locations are set.

Reference: Specify point (Camera Calibration) (p.815)

Set the magnification ratio as a numeric value to make the calibration setting.

Reference: Value Appointment (Camera Calibration) (p.816)

Make the calibration setting based on the measurement results. After measuring a position using the

measurement processing items in the measurement flow, set the position as an actual coordinates to

calculate calibration data.

Reference: Sampling (Camera Calibration) (p.817)

Make the calibration setting based on the measurement results. After measuring work width using the

measurement processing items in the measurement flow, set the actual work width to calculate calibration

Reference: Dimension Measure (Camera Calibration) (p.819)

Display the generated calibration data. The calibration data can be adjusted or edited as necessary.

Data display

Reference: Data Display (Camera Calibration) (p.822)

Camera Calibration

FH/FZ5 Processing Item Function Reference Manual

Show Quick Links

Table of Contents