Omron FH-3 Series Reference Manual page 34

Electronic flash controller FZ-LTA200 is connected:
0 +1CH are used:
Item
Pattern select Pattern 0 to 16
Brightness at
each part
Camera-mount Lighting Controller FLV-TCC1 is connected:
Item
Pattern select
On all the time
Modulate mode
Part
32
Camera Image Input
0CH is used:
Set value
Can be selected from a preset lighting pattern.
When 1 channel is used, the light volume can be adjusted to one of 256 levels.
0 to 255 When 2 channels are used, the light volume can be adjusted to one of 128
[0] levels. 0 indicates the lighting is OFF. The larger the number, the higher the
brightness.
Set value
--- Select from preset lighting patterns.
• Checked Place a check here to keep the light turned ON all of the time regardless of the
• [Unchecked] exposure time.
Select the lighting adjustment method.
• Duty
• [Duty] The brightness of the light is adjusted with 255 levels of the pulse width (PWM
• Voltage / frequency: 100 kHz).
Current • Voltage / Current
The brightness of the light is adjusted with 255 voltage / current levels.
Select voltage lighting adjustment if you will use a high-speed shutter speed.
0 to 255
Set the brightness for the selected parts.
[128]
1CH is used:
Description
Description
FH/FZ5 Processing Item Function Reference Manual