Omron FH-3 Series Reference Manual page 535

4
Adjust the color, conversion direction,
and Anti Color Shading level as
necessary.
The picked up 2 colors are displayed at Color
1 and Color 2.
Fine adjustments can also be made to the R,
G, and B values and on the color chart.
Setting item
Color1
Color2
Direction
Shading level
5
As necessary, set the display image.
Setting item
Filtered image
FH/FZ5 Processing Item Function Reference Manual
Set value
[Factory default]
• R
0 to [255]
• G
0 to [255]
• B
The most separate two colors are picked up from the specified
0 to [255]
region.
The sections corresponding to these colors in the region are
• R
converted to the color midway between the two.
0 to [255]
• G
0 to [255]
• B
0 to [255]
Select the conversion method for the set Color 1 and Color 2.
→←: Color 1 and Color 2 are converted to the color midway
• [→←]
∞→ between the two.
∞← →: Color 1 is converted to Color 2.
←: Color 2 is converted to Color 1.
0 to 255 Set the level for suppressing color contrast.
[100] The larger this value, the less the color contrast.
Set value
[Factory default]
• [Checked]
To display the original image, uncheck here.
• Unchecked
Description
Description
Anti Color Shading
3
533