Omron FH-3 Series Reference Manual page 587

Changing the Image Operation Filter Settings
You can change the settings for the filter that converts the pixel values of an image.
Setting item
[Factory default]
• [Arithmetic
operation]
• Bit operation
Operation type
• Bit shift
• Change pixel
value
• [Add]
• Subtraction
Arithmetic mode • Subtraction
(absolute)
• Multiplication
Value -255 to 255 [0]
• [NOT]
• AND
• OR
Operation mode • XOR
• NAND
• NOR
• XNOR
Value 0 to 255 [0]
FH/FZ5 Processing Item Function Reference Manual
Setting value
Set the type of operation that is used for pixel calculation.
This can be set when "Arithmetic operation" is selected for "Operation type".
Set the operation method.
This can be set when "Arithmetic operation" is selected for "Operation type".
Set the calculation value used to convert the pixel value. The result of the
operation on the pixel value using the calculation value and the operation
method of the operation mode is the converted pixel value.
This can be set when "Bit operation" is selected for "Operation type".
Set the operation method for bit operation.
This can be set when "Bit operation" is selected for "Operation type".
Set the calculation value used to convert the pixel value. The result of the
operation on the pixel value using the bit operation value and the operation
method of the bit operation mode is the converted pixel value.
Description
Advanced Filter
3
585