Specifications And External Dimensions; Sensor Head - Omron ZW-8000 Series User Manual

9-1

Specifications and External Dimensions

Sensor Head

Specifications
● ZW-S8010/S8020/S8030/SP8007/SP8010/SPR8007/SPR8010
Sensor controller
Sensor head type
Measurement center dis-
*1
tance
*2
Measuring range
*3
Static resolution
*4
Linearity
*5
Spot diameter
*6
Measuring cycle
Operating ambient illumi-
nation
Ambient temperature
range
Ambient humidity range
Degree of protection
Vibration resistance
(destructive)
Shock resistance
(destructive)
Temperature characteris-
*7
tic
LED safety
LASER safety
Material
Fiber cable length
Fiber cable minimum
bend radius
Insulation resistance (Cal-
ibration ROM)
Dielectric strength (Cali-
bration ROM)
Weight
288
Specifications and External Dimensions
ZW-S8010 ZW-S8020 ZW-S8030
@
ZW-8000
Square-shaped straight type
10 mm 20 mm 30 mm
±0.5 mm ±1 mm ±2 mm
0.002 μm 0.004 μm 0.008 μm
±0.3 μm ±1.3 μm
±0.6 µm
4 μm dia. 7 μm dia. 10 μm dia.
60 μs to 7,500 μs
Illumination on object surface max.30000 Lx: (incandescent light)
Operation: 0 to 50°C, Storage: -15 to +60°C
(No freezing and condensation)
Operation/storage: 35 to 85% (No condensation)
IP40 (IEC60529)
10 to 150 Hz (half amplitude 0.35 mm), 80 mins in each of X/Y/Z directions
2
150 m/s , 6 direction, 3 times each (up/down, left/right, forward/backward)
0.6 μm/°C 1.1 μm/°C 1.8 μm/°C
(0.2 μm/°C) (0.5 μm/°C)
(1.0 mm/°C)
Risk Group1 (IEC62471)
Class1 (IEC/EN60825-1)
Chassis: aluminum die cast
Fiber cable sheath: PVC
Calibration ROM: PC
0.3 m, 2 m (flex-resistant cable)
20 mm
Between case and all terminals: 20 MΩ (by 250 VDC)
Between case and all terminals: 1000 VAC, 50/60 Hz, 1 min
Fiber cable length 0.3m Approx. 170g
Fiber cable length 2m Approx. 180g
ZW-SP8007 ZW-SP8010 ZW-SPR8007 ZW-SPR8010
Pen-shaped straight type Pen-shaped right angle type
7 mm 10 mm 7 mm
±0.3 mm ±0.7 mm ±0.3 mm
0.002 μm 0.003 μm 0.003 μm
±0.3 μm ±0.45 μm ±0.45 μm
7 μm dia. 10 μm dia. 8 μm dia.
0.8 μm/°C 0.8 μm/°C 0.8 μm/°C
(0.4 mm/°C) (0.4 mm/°C) (0.4 mm/°C)
Chassis: SUS Chassis: SUS, aluminum
Fiber cable sheath: PVC Fiber cable sheath: PVC
Calibration ROM: PC Calibration ROM: PC
Mounting Plate: Aluminum Mounting Plate: Aluminum
Fiber cable length 0.3m Fiber cable length 0.3m
Approx. 27 g Approx. 31 g
Fiber cable length 2m Fiber cable length 2m
Approx. 37 g Approx. 41 g
10 mm
±0.7 mm
0.005 μm
±0.7 μm
11 μm dia.
0.8 μm/°C
(0.4 mm/°C)
ZW-8000/7000/5000
User's Manual