List Of Condition Data - Mitsubishi Electric QD77MS User Manual

5.5 List of condition data

No.2
No.1
Setting item
b15 b8 b7
Da.16 Condition
operator
Da.17 Address
Da.18 Parameter 1
Da.19 Parameter 2
No.2
No.1
Setting item
b15 b8 b7
Da.16 Condition
operator
b15 b8 b7
Da.25 Simultaneous
Da.26
Da.23 Number of simultaneous
starting axes
Da.17 Address
Da.18 Parameter 1
Da.19 Parameter 2
The illustrations below show the organization of the condition data stored in the buffer
memory of Simple Motion module. The condition data setting items [Da.15] to [Da.19]
and [Da.23] to [Da.26] are explained in the pages that
follow.
• QD77MS2/QD77MS4
No.10
Setting item
Setting item
Buffer memory
address
b0
26100+1000n
Da.15 Condition
target
26102+1000n
26103+1000n
26104+1000n
26105+1000n
26106+1000n
26107+1000n
n: Axis No.-1
• QD77MS16
No.10
Setting item
Setting item
Buffer memory
address
b0
22100+400n
Da.15 Condition
target
b0
Da.24 Simultaneous
starting axis
No.1
22101+400n
starting axis No.2
Simultaneous
starting axis No.3
22102+400n
22103+400n
22104+400n
22105+400n
22106+400n
22107+400n
n: Axis No.-1
Chapter 5 Data Used for Positioning Control
Buffer memory
address
Buffer memory
26190+1000n
address
26192+1000n
26110+1000n
26193+1000n
26194+1000n
26195+1000n
26112+1000n
26196+1000n
26113+1000n
26197+1000n
26114+1000n
26115+1000n
26116+1000n
26117+1000n
Buffer memory
address
Buffer memory
22190+400n
address
22110+400n
22191+400n
22111+400n
22192+400n
22193+400n
22194+400n
22195+400n
22112+400n
22196+400n
22113+400n
22197+400n
22114+400n
22115+400n
22116+400n
22117+400n
5 - 105
Up to 10 condition data points can be set
(stored) for each block No. in the buffer
memory addresses shown on the left.
Items in a single unit of condition data are
shown included in a bold frame.
Each axis has five start blocks (block Nos.
0 to 4).
(Note): For information on the organization
of the buffer memory addresses
assigned to the start blocks 1 to 4,
refer to Appendix 1 "List of buffer
memory addresses".
Up to 10 condition data points can be set
(stored) for each block No. in the buffer
memory addresses shown on the left.
Items in a single unit of condition data are
shown included in a bold frame.
Each axis has five start blocks (block Nos.
0 to 4).
Start block 2 to 4 are not allocated to buffer
memory.
Set with GX Works2.
(Note): For information on the organization
of the buffer memory addresses
assigned to the start block 1, refer
to Appendix 1 "List of buffer
memory addresses".