Mitsubishi Electric QD77MS User Manual page 264

Storage item
Stores the current operation
cycle.
[Md.132]
Operation cycle
setting Refresh cycle: At power supply
ON
This flag turns ON when the
operation cycle time exceeds
[Md.133]
operation cycle.
Operation cycle
over flag
Refresh cycle: Immediate
Stores the time that took for
operation every operation cycle.
[Md.134]
Operation time
Refresh cycle: Operation cycle
Stores the maximum value of
operation time after each
[Md.135]
module's power supply ON.
Maximum
operation time
Refresh cycle: Immediate
Storage details
Monitoring is carried out with a decimal display.
Monitoring is carried out with a decimal display.
[POINT] Latch status of operation cycle over is indicated. When this
Monitoring is carried out with a decimal display.
Monitoring is carried out with a decimal display.
5 - 126
Chapter 5 Data Used for Positioning Control
Reading the monitor value
Monitor
value
Monitor
Storage value
value
flag turns ON, correct the positioning detail or change the
operation cycle longer than current setting.
Monitor
value
Monitor
value
Storage value
0: 0.88ms
1: 1.77ms
0: OFF
1: ON (Operation cycle over occurred.)
Storage value
Unit: s
Storage value
Unit: s