Mitsubishi Electric QD77MS User Manual page 302

Setting item
[Cd.47] QD75MH initial value setting
request
[Cd.102] SSCNET control command
[Cd.137] Amplifier-less operation
mode switching request

Request to set the initial value of QD75MH in setting data.
Refer to Section 14.14 for initialized setting data.
Fetch cycle: 103[ms]
Note: After completing the initialization of setting data, switch the power ON or
reset the PLC CPU.

Set the connect/disconnect command of SSCNET communication.
Fetch cycle: 3.5[ms]

Set the switching request of the normal operation mode and amplifier-less
operation mode.
Fetch cycle: 3.5[ms]
5 - 164
Chapter 5 Data Used for Positioning Control
Setting details