Centering Adjustment Of The Tray 1/2 - Konica Minolta bizhub C360 Service Manual

Field Service Ver. 2.1 Feb. 2012
16.2.2

Centering adjustment of the tray 1/2

This adjustment must be made in the following case:
• When an image printed on a copy is displaced from the correct position with the
use of the tray1/2.
1. Make a test print and check the amount of misalignment.
2. Pull out the tray where this adjustment is made.
[1]
[1]
A0EDF3C006DA
[1]
A0EDF3C007DA
[1]
[2]
A0EDF3C008DA
16. MECHANICAL ADJUSTMENT
3. Stretch the paper guides [1] to the
maximum size position.
4. Loosen two screws [1].
5. Move the paper guides [1] complete
according to the amount of the mis-
centering you checked in step 1 and
adjust the center position of it.
6. Tighten two screws [2].
7. Make another test print and check
the amount of misalignment.
535